Table of Contents
Advertisement
User Guide
2. Connect cameras to the video ports of TeleEye GX.
3. Plug in the power adaptors to TeleEye GX and cameras.
4. Connect TeleEye GX to the network switch.
5. Switch on the power of TeleEye GX.
6. If all installed hard disks are not in TeleEye GX recognized format, they would be
formatted automatically when startup completes.
Setup Procedures on PC Side:
1. Configure the network settings of TeleEye GX through PC with LAN connection.
2. Install TeleEye IP Setup Utility. .NET framework is also needed for the operations. Both
can be found in the included software CD.
3. Run IP Setup Utility.
PAGE 17
Advertisement
Table of Contents
