1. Manuals
  2. Brands
  3. TeleEye Manuals
  4. DVR
  5. RX364
  6. User manual

TeleEye RX364 User Manual

Video recording transmitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TeleEye R X S er i es
Video Recording Trans m it t er
RX364
RX368
RX361 6
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX364 and is the answer not in the manual?

Questions and answers

Related Manuals for TeleEye RX364

Summary of Contents for TeleEye RX364

  • Page 1 TeleEye R X S er i es Video Recording Trans m it t er RX364 RX368 RX361 6 User Guide...
  • Page 3 Signal Communications Limited. TeleEye is a trademark of Signal Communications Limited and is registered in China, European Communities, H ong K ong, US and other countries.

  • Page 4: Table Of Contents

    L oca l C C T V M onitor : L iv e M onitoring , R e cording a nd P l a y b a ck TeleEye R X R e ce p tion S of tw a re W X - 30 : L iv e M onitoring , R e cording a nd P l a y b a ck...
  • Page 5 A P P E ND I X F 15 1 A udit T ria l L og D e s crip tion 15 1 A udit T ria l L og de s crip tion of s e tting l og a nd op e ra tion l og 15 1 S e tting L og O p e ra tion C ol um n T a b l e 15 1...

  • Page 6: Introduction

    W ith a built-in CD-w riter, video f ootage stored inside TeleEye R X can be easily extracted f or evidential purposes. Recorded video can be backed up in CD and play ed back in any PC w ithout any special sof tw are.

  • Page 7: F E A Ture S

    Tele Eye U s er P a g e 2 G u i d e B . F e a t u r e s H a r d w a r e F e a t u r e Video recording w ith rate up to 100/ 120f ps (RX 364), 200/ 240f ps (RX 368 &...

  • Page 8: R E M Ov Ing Th E P A Ck A G E S

    A f ter removing the package, make sure y ou have the f ollow ing items: TeleEye R X Video Recording Transmitter w ith Built-in CD W riter H ard Disk Cartridge A ccessories (K ey x 2 and Screw x 4)
  • Page 9 Tele Eye U s er P a g e 4 G u i d e S c r e e n Mo d e Co n t r o l Fo r R X 364 Full, Q uad, 3 x 3, H ex screen mode: The sy stem w ill display one, f our, eight, sixteenth screens decided on the button pressed.
  • Page 10 Tele Eye U s er P a g e 5 G u i d e Mo d e Co n t r o l Bu t t o n s a n d L E D These 5 buttons are used f or sw itching betw een the control modes “E v en t”...

  • Page 11: R E A R P A Ne L D E S Crip Tion

    Tele Eye U s er P a g e 6 G u i d e F . R e a r P a n e l D e s c r i p t i o n RX3 6 4 : RX3 6 8 RX3 6 16 In t r o d u c t i o n...
  • Page 12 { C O L L E D } : W hen O N , indicates that collision is occurring on the netw ork { L I NK L E D } : W hen O N , indicates that TeleEye R X is connecting to the netw ork and ready to f unction 5.
  • Page 13 G u i d e RS 48 5 I n / O u t P or t { I n} : 2-w ay terminal block f or connecting a key board controller to TeleEye R X transmitter in order to control a PTZ camera...

  • Page 14: H A Rd D Is K Ins Ta L L A Tion, F Orm A Tting A Nd S Ca Nning

    A. H a r d D i s k I n s t a l l a t i o n TeleEye R X transmitter supports A T A standard hard disk. User should use the hard disk listed at the hard disk recommendation list on A ppendix E.
  • Page 15 Tele Eye U s er P a g e 10 G u i d e In st a l l a t i o n P r o c e d u r e R X M UST be shut dow n bef ore install / uninstall hard disk Press “M en u ”...
  • Page 16 Tele Eye U s er P a g e 11 G u i d e I nsert the DC pow er cable and I DE cable on the H DD Position the H DD into carrier body and secure the H DD using the f our screw s provided. Slide the top cover back to the carrier body by sliding f orw ard to secure.

  • Page 17: F Orm A T H A Rd D Is K

    TeleEye R X transmitter. Formatting w ill be used if the hard disk f ormat is N O T TeleEye R X transmitter recogniz ed f ormat. Usually , it is a new hard disk, or a hard disk not used by TeleEye R X transmitter.
  • Page 18 F O R M AT DISK Tele Eye AL L DAT A IN DISK U s er P a g e 13 G u i d e W IL L E R ASE D , SU R E P R O CE E D ? Y E S Ma n u a l F o r m a t t i n g I t w ill be used if user w ants to f ormat the hard disk so as to have a clean recording space and...
  • Page 19 F O R M AT F O R M AT F INISH E D , Tele Eye U s er P a g e 14 G u i d e SY ST E M W IL L R E ST AR T NO W pops up.

  • Page 20: S Ca N D Is K

    I t is a hard disk maintenance f unction w hich similar to Scan Disk f unction provided by the O perating Sy stem of y our personal computer. TeleEye R X transmitter provides this f unction in an attempt to rescue the hard disk w hen errors are f ound, and to enhance its perf ormance and reliability .

  • Page 21: B A S Ic Ins Ta L L A Tion F Or L Oca L A Nd R E M Ote M Onitoring

    **For RX368/RX3616, t h e “VIDEO OUT” p ort i s on t h e ri g h t s i d e of “VIDEO IN ” ** E q u i p m e n t TeleEye R X Transmitter Cameras...
  • Page 22 Turn on the pow er of TeleEye R X , camera and monitor. Check the { P ow er L E D } w hich is lit up in blue color continuously at TeleEye R X f ront panel af ter pow er on. A f ter...
  • Page 23 Tele Eye U s er P a g e 18 G u i d e Press the “M en u ” button to pop up the [M A I N M E NU ] on O SD. M AIN M E NU SE T U P .

  • Page 24: S E Tup Teleeye R X F Or L A N C Onne Ction W Ith S Ta Tic Ip

    **For RX368/RX3616, t h e “VIDEO OUT” p ort i s on t h e ri g h t s i d e of “VIDEO IN ” ** Eq u i p m en t TeleEye R X Transmitter N etw ork Sw itch...
  • Page 25 S et u p P r o c ed u r e 1. Connect cameras to TeleEye R X { V ideo I n p u t} w ith RG 59 cable and BN C connector. N ot e : T h e c a me ra s s y s t e m i s e i t h e r N TS C or P A L a n d s u p p os e s a l l c a me ra s u s e t h e S A M E s y s t e m f orma t .
  • Page 26 11. Conf igure TeleEye R X transmitter I P setting Setup TeleEye R X transmitter I P through CCTV monitor, please go to step 11a. Setup TeleEye R X transmitter I P through PC, through PC, please go to step11b.
  • Page 27 Tele Eye U s er P a g e 22 G u i d e TeleEye R X RG59 cable 192.168.0.2 C C T V E t h er n et RG59 cable M o n i t o r...
  • Page 28 [S E T T I NG M O D I F I E D ] message board w ill pop up. Press button to restart the TeleEye R X . “E n ter ” B a s i c I n s t a l l a t i o n f o r L o c a l a n d R em o t e M o n i t o r i n g...
  • Page 29 “ 1 9 2 . 1 6 8 . 0 . x x ” e x c e p t “ 1 9 2 . 1 6 8 . 0 . 2 ” w h i c h i s TeleEye R X d e f a u l t IP a d d r e s s .
  • Page 30 W X -30 Sof tw are G uide) 11.b.9. Choose [T r a n s m itter ] [Reg is tr a tion ] to register the TeleEye R X transmitter. User needs to input transmitter serial number and registration code. For example : S er ia l No.
  • Page 31 11.b.12. Press [T r a n s m itter S etu p ] icon to show TeleEye R X conf iguration menu. 11.b.13. Select [C on n ection ] and press [Netw or k S ettin g s ] icon to conf igure netw ork setting.
  • Page 32 PC to the LA N netw ork through s tr a ig h t- th r ou g h E th er n et ca b l e. 13. Check Ethernet socket of both TeleEye R X transmitter and PC to ensure that the...
  • Page 33 Tele Eye U s er P a g e 28 G u i d e 14. Run W X - 3 0 sof tw are at any local netw ork PC. (For details of W X -30 sof tw are installation, please ref er to W X -30 Sof tw are G uide) 15.

  • Page 34: S E Tup Teleeye R X F Or B Roa Db A Nd Or N A Rrow B A Nd Inte Rne T C Onne Ction W Ith S Ta Tic Ip

    Na r r ow b a n d : Connection speed is below 128kbps, e.g. dial up netw ork, G PRS Eq u i p m en t TeleEye R X Transmitter N etw ork Sw itch, Router/ G atew ay...
  • Page 35 4. Connect the pow er adapter (12V DC) to the TeleEye R X . 5. Turn on the pow er of TeleEye R X , camera and monitor. Check the { P ow er L E D } w hich is lit up in blue color continuously at TeleEye R X f ront panel af ter pow er on. A f ter...
  • Page 36 Setup TeleEye R X transmitter I P through CCTV monitor, please go to step 11a. Setup TeleEye R X transmitter I P through PC, please go to step11b. 11.a Conf igure TeleEye R X transmitter I P setting through CCTV M onitor...
  • Page 37 M O D I F I E D ] message board w ill pop up. 11.b Conf igure TeleEye R X transmitter I P setting through PC B a s i c I n s t a l l a t i o n f o r L o c a l a n d R em o t e M o n i t o r i n g...
  • Page 38 11.b.4. Enter an I P address, subnet mask and Def ault gatew ay . N ote that I P address should be “192.168.0.xx” except “192.168.0.2” w hich is TeleEye R X def ault I P address. 11.b.5. Enter the Pref erred and A lternate DN S server, if necessary .
  • Page 39 W X -30 Sof tw are G uide) 11.b.9. Choose [T r a n s m itter ] [Reg is tr a tion ] to register the TeleEye R X transmitter. User needs input transmitter serial number registration code.
  • Page 40 [C on n ect] setting is valid or not. 11.b.12. Press [T r a n s m itter s etu p ] icon to show TeleEye R X conf iguration menu. 11.b.13. Select [C on n ection ] press [Netw or k...
  • Page 41 L E D } turns O N . Then connection diagram is show n as f ollow s: L I N K C O L RG59 cable TeleEye R X C C T V M o n i t o r 2 1 0 . 1 7 . 1 3 9 . 1 4 5...
  • Page 42 Tele Eye U s er P a g e 37 G u i d e 14. Conf igure the netw ork setting f or TeleEye R X transmitter and y our PC if necessary , such as router/ gatew ay port...
  • Page 43 N arrow band : Connection speed is below 128kbps, e.g. dial up netw ork, G PRS Eq u i p m en t TeleEye R X Transmitter N etw ork Sw itch, Router/ G atew ay , A DSL M odem...
  • Page 44 4. Connect the pow er adapter (12V DC) to the TeleEye R X . 5. Turn on the pow er of TeleEye R X , camera and monitor. Check the { P ow er L E D } w hich is lit up in blue color continuously at TeleEye R X f ront panel af ter pow er on. A f ter...
  • Page 45 Setup TeleEye R X transmitter I P through CCTV monitor, please go to step 11a. Setup TeleEye R X transmitter I P through PC, please go to step11b. 11.a Conf igure TeleEye R X transmitter I P setting through CCTV M onitor...
  • Page 46 Tele Eye U s er P a g e 41 G u i d e C O NNEC TI O N 11.a.4 Select [T C P / I P ] option and Press “E n ter ” TC P / I P …...
  • Page 47 W W W . TEL EEY E.NET “w w w .y ou r _ s ite.y ou r _ com p a n y .teleEye.net” 11.a.15 Use “U p ” or “D ow n ” or “L ef t” or “Rig h t”...
  • Page 48 . Note: IP address should be “1 9 2 .1 6 8 .0 .x x ” ex c ep t “1 9 2 .1 6 8 .0 .2 ” w hic h is TeleEye R X default IP address.
  • Page 49 W X -30 Sof tw are G uide) 11.b.9. Choose [T r a n s m itter ] [Reg is tr a tion ] to register the TeleEye R X transmitter. User needs to input transmitter serial number and registration code. For example : S er ia l No.
  • Page 50 11.b.12. Press [T r a n s m itter S etu p ] icon to show TeleEye R X conf iguration menu. 11.b.13. Select [C on n ection ] and press [Netw or k icon to conf igure S ettin g s ] netw ork setting.
  • Page 51 L E D } turns O N . Then connection diagram is show n as f ollow s: RG59 cable P rimary D N S : 2 0 2 .1 4 .6 7 .4 TeleEye R X S econd ary D N S : 2 0 2 .1 4 .6 7 .1 4 C C T V M o n i to r www.your_site.your_company.teleeye.net...
  • Page 52 P a g e 47 G u i d e 14. Conf igure the netw ork setting f or TeleEye R X transmitter and y our PC if necessary , such as router/ gatew ay port mapping (select router/ gatew ay I P as I P provided by y our I SP and the transmitter I P as I P provided by the router/ gatew ay ), f irew all, etc.
  • Page 53 * * F or R X 36 8 / R X 36 1 6 , the “VIDEO OUT” p ort is on the rig ht side of “VIDEO IN ” * * Eq u i p m en t TeleEye R X Transmitter I SDN / PSTN M odem...
  • Page 54 Turn on the pow er of TeleEye R X , camera and monitor. Check the { P ow er L E D } w hich is lit up in blue color continuously at TeleEye R X f ront panel af ter pow er on. A f ter...
  • Page 55 Setup TeleEye R X transmitter I P through CCTV monitor, please go to step 11a. Setup TeleEye R X transmitter I P through PC, please go to step11b. 11a: Conf igure TeleEye R X transmitter modem connection setting through CCTV M onitor...
  • Page 56 Press “E n ter ” button to input baud rate and ring count setting 11.b: Conf igure TeleEye R X transmitter modem connection setting through PC RG59 cable TeleEye R X C C T V M o n i t o r...
  • Page 57 Tele Eye U s er P a g e 52 G u i d e 11.b.3. W indow s 2000/ X P can search the modem device automatically . I f modem installation has problem, please ref er to the modem manual. 11.b.4.
  • Page 58 G u i d e 11.b.6. Choose [T r a n s m itter ] [Reg is tr a tion ] to register the TeleEye R X transmitter. User needs to input transmitter serial number and registration code. For example : S er ia l No.
  • Page 59 . 12. I f user setup modem connection by using local CCTV monitor (Step 11a), please install the modem f or y our PC and connect to the telephone netw ork in order to connect to TeleEye R X transmitter 12.1...
  • Page 60 Tele Eye U s er P a g e 55 G u i d e 12.3 W indow s 2000/ X P can search the modem device automatically . modem installation problem, please ref er to the modem manual. 12.4 A f ter searching the modem, W indow s 2000/ X P can install the modem driver automatically .
  • Page 61 Tele Eye U s er P a g e 56 G u i d e 12.7 Press [C on n ect] icon to connect y our PC and the transmitter. The video appears on the W X -30 if success. O therw ise, the [W a r n in g ] board w ill pop up and show y ou f ailure message.

  • Page 62: B A S Ic O P E Ra Tion F Or L Oca L A Nd R E M Ote M Onitoring 5

    Tele Eye U s er P a g e 57 G u i d e SECTION 4 Basic Operation for L ocal and R em ote M onitoring A. L o c a l C C T V M o n i t o r : L i v e M o n i t o r i n g , R e c o r d i n g a n d P l a y b a c k L i v e Mo n i t o r i n g Press “S cr een C on tr ol ”...
  • Page 63 Tele Eye U s er P a g e 58 G u i d e Re c o r d i n g R EC O R D I NG Press “Rec” button and [RE C O RD I NG ] menu w ill pop up.

  • Page 64: Play Back

    Tele Eye U s er P a g e 59 G u i d e P l a y b a c k R EC O R D I NG L O G 1 2 – 1 3 A UG 2 0 0 5 TI ME C A MER A EV ENT...

  • Page 65: Teleeye R X R E Ce P Tion S Of Tw A Re W X - 30 : L Iv E M Onitoring , R E Cording A Nd P L A Y B A Ck

    Tele Eye U s er P a g e 60 G u i d e Using “P l a y b a ck C on tr ol b u tton ” f or P l a y These icons will shown on OSD for playback st at u s P a u s e R e w i n d...
  • Page 66 A uto-arrange can optimise the screen view s in order to display as many high- resolution pictures as possible. User can change TeleEye R X Reception Sof tw are W X -30 live monitoring q uality by f ollow ing steps.
  • Page 67 Tele Eye U s er P a g e 62 G u i d e Re c o r d i n g Press [Recor d] icon to setup recording setting. I nput administrator passw ord (0 0 0 0 0 0 as def ault passw ord) and press [O K] button.
  • Page 68 Tele Eye U s er P a g e 63 G u i d e P l a y b a c k Press [P l a y ] icon to show play back menu Select and input the record date and time f or searching and press [Rel oa d] icon.

  • Page 69: Os D M Enu Operation

    Tele Eye U s er P a g e 64 G u i d e SECTION 5 OS D M enu Operation A. H o w t o u s e O S D m e n u Press the “M en u ” button to open the main menu Using the “U p ”...

  • Page 70: M A In M E Nu

    L O C K KE Y S : Lock the panel key s : Shut dow n or restart TeleEye R X transmitter S H U T D O W N S E T U P M E N U V ID E O .
  • Page 71 Tele Eye U s er P a g e 66 G u i d e Ma i n Me n u S e t u p V i d e o V ID E O C A M E R A S E T T IN G .

  • Page 72: Ptz Camera

    Tele Eye U s er P a g e 67 G u i d e Ma i n Me n u S e t u p V i d e o Ca m e r a S e t t i n g Ca m e r a X S e t t i n g G e n e r a l P T Z S e t t i n g G E N E R A L PT Z S E T T IN G...
  • Page 73 D E F A U L T D I S P L A Y M O D E : Select def ault display mode in CCTV monitor af ter TeleEye R X transmitter boot up : Change horiz ontal position of local video output...
  • Page 74 Tele Eye U s er P a g e 69 G u i d e Ma i n Me n u S e t u p Re c o r d i n g R E C O R D IN G R E C O R D IN G M O D E C O N T IN U O U S...
  • Page 75 OPT ION Tele Eye U s er P a g e 70 G u i d e A DD L IST V IEW Calendar View of recording schedule is show n. Press SU NDA Y “E n ter ” button to add schedule or change view . H OU R T IM E SCA L E CA M ERA...

  • Page 76: Time Settings

    Tele Eye U s er P a g e 71 G u i d e I n [A D D S C H E D U L E ] menu, select [S T A RT T I M E T I M E ] and [E ND T I M E ] to choose the time interval f or the schedule recording.
  • Page 77 OPT ION Tele Eye U s er P a g e 72 G u i d e A DD L IST V IEW O ne blo c k o f t i me s lo t o n c alendar v i ew rep res ent s a S U N D A Y ←...
  • Page 78 REM OV E OPT ION A DD A DD REM OV E SEL ECT ED Tele Eye U s er REM OV E P a g e 73 REM OV E G u i d e REM OV E DA Y EDIT EDIT REM OV E W EEK...
  • Page 79 A DD Tele Eye U s er REM OV E P a g e 74 G u i d e EDIT COPY CA L ENDA R V IEW Ed i t i n g S c h ed u l e P r o c ed u r e I n list view , select a time slot that y ou w ould like to SU NDA Y ST A RT...
  • Page 80 R ec o r d i n g R et en t i o n This f irmw are of TeleEye R X transmitter supports passw ord protection f or all menus, Sy stem administrator can setup a passw ord to protect the transmitter f rom being operated by...
  • Page 81 Tele Eye U s er P a g e 76 G u i d e Ma i n Me n u S e t u p S w i t c h e s S W IT C H E S S W IT C H 1 S E T T IN G .
  • Page 82 Tele Eye U s er P a g e 77 G u i d e Mo d i f y sy st e m t i m e Sy stem date and time can only be modif ied w hen T I M E S Y NC is disabled. Press “E n ter ”...
  • Page 83 : Change TeleEye R X transmitter secondary DN S S E C O ND A RY D NS : Change TeleEye R X transmitter sureL I N K setting S U RE L I NK Ma i n Me n u...
  • Page 84 Tele Eye U s er P a g e 79 G u i d e Ma i n Me n u S e t u p Co n n e c t i o n Mo d e m M O D E M B A U D R A T E 57 600 B PS R IN G...
  • Page 85 Tele Eye U s er P a g e 80 G u i d e Ma i n Me n u S e t u p T r a n sm i t t e r T R A N S M IT T E R T R A N S M IT T E R N A M E R X 364 R E G IS T R A T IO N C H E C K IN G...
  • Page 86 : Set the backup siz e (10M B ~ 650 M B) B A C KU P S I Z E : Start Backup CD-R operation, and TeleEye R X S T A RT B A C KU P transmitter w ill search the f ootages f rom start date and time and calculate the end time of f ootage according to the f ootages siz e and backup siz e.
  • Page 87 Tele Eye U s er P a g e 82 G u i d e Ma i n Me n u S c a n / F o r m a t D i sk S C A N / F O R M A T D IS K M A S T E R H D D M O D E L...

  • Page 88: R E Cording L Og M E

    Tele Eye U s er P a g e 83 G u i d e Ma i n Me n u L o c k K e y s L O C K K E Y S L O C K K E Y S E N T E R A U T O K E Y L O C K...
  • Page 89 Tele Eye U s er P a g e 84 G u i d e Press “E n ter ” button to choose play recording log, time search f unction and log time scale Press the “B a ck ” button to exit the recording log menu PL A Y T IM E...

  • Page 90: P T Z M E

    RECA L L PRESET PROGRA M PRESET Tele Eye U s er P a g e 85 G u i d e RECA L L PA T ROL ST OP PA T ROL A U X PA N IRIS CT RL F OCU S CT RL A U X CT RL D .

  • Page 91: E V E Nt M E

    Tele Eye U s er P a g e 86 G u i d e R E C O R D IN G S T A R T R E C O R D IN G E N T E R R E C C A M E R A - - - -...
  • Page 92 Tele Eye U s er P a g e 87 G u i d e 4. Press “E n ter ” button to conf irm the selection and pop up the sub-menu : Show event status E V E NT S T A T U S E V E NT L O G : Show the event log : Show the remote connection log...
  • Page 93 Tele Eye U s er P a g e 88 G u i d e E v e n t Me n u A l a r m L o g A L A R M L O G D A T E T IM E C H A N N E L S T A T U S...
  • Page 94 Tele Eye U s er P a g e 89 G u i d e E v e n t Me n u Co n n e c t i o n L o g C O N N E C T IO N L O G D A T E T IM E...
  • Page 95 Tele Eye U s er P a g e 90 G u i d e E v e n t Me n u O p e r a t i o n L o g OPERA T ION L OG DA T E T IM E OPERA T ION...
  • Page 96 Tele Eye U s er P a g e 91 G u i d e P l a y i n g c o r r e sp o n d i n g f o o t a g e f r o m e v e n t L o g Event log play back supports user to play back the video directly f rom selected event log.

  • Page 97: Advanced Operation

    Co n t r o l P o r t TeleEye RX 3 64/ 3 68 / 3 616 support up to 4/ 8/ 16 alarm ports in that order w ith tamper detection f or connecting w ith alarm sensors, 4 additional input sensors and 4 relay ports f or control. The def initions of alarm and relay control ports are show n in the f ollow ing diagram.
  • Page 98 N / A I n s t a l l TeleEye R X w i t h A l a r m S en s o r s a n d R el a y C o n t r o l P o r t...

  • Page 99: Ins Ta L L Teleeye R X W Ith T A M P E R C Ircuit A Nd E X Te Rna L R E S Is Tors

    I n s t a l l TeleEye R X w i t h T a m p er C i r c u i t a n d Ex t er n a l R es i s t...
  • Page 100 I n s t a l l TeleEye R X w i t h T a m p er C i r c u i t a n d Ex t er n a l R es i s t...
  • Page 101 I n s t a l l TeleEye R X w i t h T a m p er C i r c u i t a n d Ex t er n a l R es i s t...

  • Page 102: T H Roug H P Ut C Ontrol

    Tele Eye U s er P a g e 97 G u i d e C. T h r o u g h p u t Co n t r o l Throughput control f unction can limit the transmitter output data rate. T h r o u g h p u t C o n t r o l S et u p P r o c ed u r e Press “M en u ”...

  • Page 103: E V E Nt H A Ndl Ing

    8 . D is k U s a g e 9. O v er h ea t TeleEye R X supports 8 actions w hich can be activated by any events as above. 1. Recor din g 2 . S w itch 3 .
  • Page 104 TeleEye R X . O therw ise, w hen the state of the circuit is open, it indicates arm of TeleEye R X . The arm/ disarm input circuit ty pe is normal open (N O ). W hen the state of the circuit is open, it indicates disarm of TeleEye R X .
  • Page 105 / DI SA RM tamper circuit ty pe according to the conf iguration E N A B L E D Y E S of TeleEye R X arm/ disarm tamper circuit ty pe. A RM STA TE C L OSE...
  • Page 106 TeleEye R X . The security sw itch input circuit ty pe is normal open (N O ). W hen the state of the circuit is open, it indicates security sw itch of f of TeleEye R X .
  • Page 107 “Rig h t” button to choose on state according SE C URI TY SW I TC H to the conf iguration of TeleEye R X security E N A B L E D Y E S sw itch control circuit ty pe.
  • Page 108 TeleEye R X . The alarm sensor input circuit ty pe is normal open (N O ). W hen the state of the circuit is open; it indicates normal of TeleEye R X . O therw ise, w hen the state of the circuit is close, it indicates alarm trigger of TeleEye R X .
  • Page 109 Tele Eye U s er P a g e 10 4 G u i d e F ir e Z on e This z one allow s alarms to be triggered no matter w hich arm state of the sy stem is, i.e. armed or disarmed.
  • Page 110 Tele Eye U s er P a g e 10 5 G u i d e E x it S u rv eil l a n c e z o n e AR M Al a rm 1 Al a rm 2 Al a rm 3 Al a rm 4 Tele E y e R X...
  • Page 111 Tele Eye U s er P a g e 10 6 G u i d e E x a m p l e o f E n t r y / E x i t Z o n e W IT H O U T S e c u r i t y S w i t c h U sa g e F o r E n t r y Z o n e : E n t ry S u rv eil l a n c e z o n e...
  • Page 112 Tele Eye U s er P a g e 10 7 G u i d e F o r E x i t Z o n e : E x it S u rv eil l a n c e z o n e AR M Al a rm 1 Al a rm 2...
  • Page 113 Tele Eye U s er P a g e 10 8 G u i d e D i f f e r e n t Co m b i n a t i o n Ca se s o f A r m / D i sa r m , S e c u r i t y S w i t c h a n d A l a r m f o r t h e 3 Z o n e T y p e I n i t i a l S t a t e...
  • Page 114 Tele Eye U s er P a g e 10 9 G u i d e E n t r y / E x i t Z o n e N o a l a r m t r i g g e r . D i s a r m R e c o r d i n g s t o p s T r i g g e r a l a r m .
  • Page 115 P h y si c a l Co n f i g u r a t i o n f o r A l a r m The alarm input and ground of TeleEye R X transmitter need to connect to various kinds of sensors w hich are commonly installed at entrance or special part of the surveillance area.
  • Page 116 E N A B L E D Y E S according to the conf iguration of TeleEye R X SE N SOR N A M E A L A RM SE N SOR TY PE alarm sensor tamper circuit ty pe.
  • Page 117 Tele Eye U s er P a g e 112 G u i d e Mo t i o n M otion M otion detection can be triggered w hen motion occurs on the camera. M otion detection has dif f erent sensitivity levels. For motion event on each video input channel, it depends on the motion of selected area.
  • Page 118 Tele Eye U s er P a g e 113 G u i d e Enable the motion setting. Select [M O T I O N D E T E C T I O R S E T T I NG ] option and press M OTI ON 1 SE TTI N G E N A B L E D...
  • Page 119 Tele Eye U s er P a g e 114 G u i d e V i d e o L o ss V ideo L os s Video loss can be triggered w hen the video channel input disappears and happens if the transmitter receives no signal f rom the camera.
  • Page 120 TeleEye R X . The sy stem tamper input circuit ty pe is normal open (N O ). W hen the state of the circuit is open, it indicates normal of TeleEye R X . O therw ise, w hen the state of the circuit is close, it indicates sy stem tamper of TeleEye R X .
  • Page 121 TeleEye R X . O therw ise, w hen the state of the circuit is open, it indicates pow er f ailure of TeleEye R X . The pow er f ailure input circuit ty pe is normal open (N O ). W hen the state of the circuit is open, it indicates normal of TeleEye R X .

  • Page 122: Setting Menu

    POW E R F A I L URE or “Rig h t” button to choose sensor ty pe according to the conf iguration of TeleEye E N A B L E D Y E S SE N SOR TY PE...
  • Page 123 Tele Eye U s er P a g e 118 G u i d e D i sk U sa g e Disk usage event w ill be triggered if hard disk usage exceeds user specif ied w arning level. The w arning level consists of 6 levels : 50% , 60% , 70% , 80% , 90% and 100% .

  • Page 124: E V E Nt A Ction

    G u i d e E. Ev e n t A c t i o n TeleEye R X supports event actions such as Recording, Sw itch, Dialback, Email, Buz z er, Event LED, Live camera and PTZ w hen there is an event detected f rom alarm, tamper of alarm, motion, video loss, tamper of arm/ disarm, tamper of security sw itch, pow er f ailure, disk usage, overheat and sy stem tamper.
  • Page 125 Tele Eye U s er P a g e 120 G u i d e Re c o r d i n g Recor din g I f an event is triggered, recording can record the video content at user selected camera w ith selected recording mode.
  • Page 126 Tele Eye U s er P a g e 121 G u i d e Use the “L ef t” or “Rig h t” button to select camera and press the “U p ” or “D ow n ” RE C ORDI N G C A M E RA button to enable or disable recording camera.
  • Page 127 Tele Eye U s er P a g e 122 G u i d e S w i t c h A c t i o n se t u p p r o c e d u r e I n the action menu, select [S W I T C H ] option and X X X X X X X A C TI ON press “E n ter ”...
  • Page 128 Tele Eye U s er P a g e 123 G u i d e 10. Select [L A T C H D U RA T I O N] option and press the “L ef t” or “Rig h t” button to choose GE N E RA L SW I TC H SE TTI N G the latch duration.
  • Page 129 PORT Tele Eye U s er P a g e 124 G u i d e PORT : - 2 0 4 I P : 210. 17.139 .145 Select [E NA B L E D ] and set [Y E S ] to enable X X X X X X X DI A L B A C K dial back action.
  • Page 130 Tele Eye U s er P a g e 125 G u i d e For modem connection, user needs to input the dial back phone number in [P H O NE ] DI A L B A C K PHON E X SE TTI N G option.
  • Page 131 Tele Eye U s er P a g e 126 G u i d e 13. Press the icon to select the connection ty pe f or dialback 14. Press the icon to enter [C on n ection S p eed] message broad to select bit rate, port number.
  • Page 132 SM TP SE RV E R Tele Eye U s er P a g e 127 G u i d e SM TP SE RV E R A DDRE SS TE L E E Y E .C . . A UTHE N TI C A TI ON Y E S USE R N A M E USE R...
  • Page 133 Tele Eye U s er P a g e 128 G u i d e to exit the O SD menu and R X transmitter w ill pop up a restart message. Press “E n ter ” button to restart the transmitter. 10.
  • Page 134 Tele Eye U s er P a g e 129 G u i d e Bu z z e r The built-in buz z er can give “B eep ” sound that draw s nearby operator’s attention w hen event is triggered.
  • Page 135 G u i d e E v e n t L E D The event LED is the LED built on the f ront panel of TeleEye R X transmitter . I f an event is triggered, the LED is blinking until the event is clear.
  • Page 136 Tele Eye U s er P a g e 131 G u i d e Select [A S S O C A I T E C A M E RA ] option and press “E n ter ” button to enter the live camera action A SSOC I A TE C A M E RA S setting menu.

  • Page 137: P A S S W Ord

    Tele Eye U s er P a g e 132 G u i d e Select [RE C A L L P RE S E T ] option and use the X X X X X X X PTZ “L ef t” or “Rig h t”...

  • Page 138: B Uil T- In W E B S E Rv E R

    G . B u i l t - I n W e b S e r v e r Built-in w eb server allow s user to access and control TeleEye R X transmitter by using w eb brow ser, such as M S I nternet Explorer. I n order to use w eb server f unction, user must install (h t t p : / / w w w .
  • Page 139 Ty pe the transmitter passw ord w hich is same as the administrator passw ord of TeleEye Recep tion S of tw a r e W X - 3 0 . Choose the connection stream, LA N , broadband or narrow band f or the w eb server connection.
  • Page 140 Tele Eye U s er P a g e 135 G u i d e Press “P T Z ” button to view control the PTZ camera. The PTZ control menu w ill pop up as show n. User can control the PTZ camera in this menu such as Pan, Tilt, A uto and so on.

  • Page 141: B A Ck Up To C D - R

    H . B a c k u p t o C D - R TeleEye R X transmitter supports backup f unction in a CD-R and provides maximum backup storage siz e of 650M B. The CD-R able to auto run w ith the portable play er sof tw are af ter inserted into PC.
  • Page 142 Tele Eye U s er P a g e 137 G u i d e B A C K UP PRE PA RE F I L E The transmitter prepares the backup CD f ile B A C K UP C RE A TE I M A GE I t creates CD I mage f or burning CD...

  • Page 143: C Onne Ction W Ith P T Z Ca M E Ra S

    I . C o n n e c t i o n w i t h P T Z c a m e r a s A s TeleEye R X transmitter built w ith a RS485 I N and O UT port, y ou can connect port O UT to Pan/ Tilt/ Z oom cameras (in parallel) and connect port I N to key board controller.
  • Page 144 Tele Eye U s er P a g e 139 G u i d e Select [C A M E RA S E T T I NG ] option and press C A M E RA 1 SE TTI N G V I DE O I N STA L L Y E S...
  • Page 145 RE C A L L PRE SE T Tilt Dow n Tele Eye U s er P a g e 140 G u i d e PROGRA M PRE SE T RE C A L L PA TROL STOP PA TROL Pan Lef t A UX C TRL...

  • Page 146: P A Ne L K E Y L Ock

    Tele Eye U s er P a g e 141 G u i d e J . P a n e l K e y L o c k Panel key lock is used to prevent the buttons on the transmitter panel f rom being pressed carelessly .

  • Page 147: T Im E S Y Nch Roniz A Tion

    Tele Eye U s er P a g e 142 G u i d e K . T i m e S y n c h r o n i z a t i o n SE TUP M E N U Press “M en u ”...

  • Page 148: S A F E Ty Ins Truction 14

    Tele Eye U s er P a g e 143 G u i d e APPENDIX A Safety Instruction Im p o r t a n t sa f e t y i n st r u c t i o n Read the instruction caref ully .

  • Page 149: L Im Ited W Arranty

    10. Customer shall be responsible f or backing up the data contained in the disk products. 11. TeleEye shall have no responsibility arising out of any damage to, or loss of the data contained in the disk products.

  • Page 150: Appendix C

    I N K available. This section w ill help y ou to conf igure and use it. By using of sureL I N K technology , the pow erf ul TeleEye R X can w ork on broadband I nternet economically .
  • Page 151 Tele Eye U s er P a g e 146 G u i d e H ow to A p p l y f or sureL I N K A ddr es s Y ou can apply f or sureL I N K by visiting our w eb site at ht t p : / / w w w . Tel eE y e. c o m Step 2 Step 1 Sign up to create y our user account...
  • Page 152 To do this, y ou can visit our TeleEye Product Support again and f ollow the steps as below : Transmitter M odif ication > Select a sureL I N K address (D om a in Na m e) y ou w ant to...
  • Page 153 Tele Eye U s er P a g e 148 G u i d e S tep 2 Enter the O l d Reg is tr a tion C ode, New T r a n s m itter S er ia l Nu m b er and New Reg is tr a tion C ode at each f ield provided.

  • Page 154: Appendix D

    Please f ollow the f ollow ing procedures to upgrade the new version of TeleEye R X f irmw are. N ote that user must upgrade the new version of TeleEye R X f irmw are TW I CE if the current version f irmw are is below 2.00.00 version.
  • Page 155 . The TeleEye Recep tion S of tw a r e W X - 3 0 contains all the settings f or dif f erent remote video monitoring method. Dif f erent connection methods may have dif f erent settings, and some of the setting conf igured in one connection method is not applicable to other method.

  • Page 156: A Udit T Ria L L Og D E S Crip Tion

    Tele Eye U s er P a g e 151 G u i d e APPENDIX F A u dit T rial L o g D es c ript io n A. Au d i t T r i a l L o g d e s c r i p t i o n o f s e t t i n g l o g a n d o p e r a t i o n l o g Event short f orm : [EVENT] : arm / disarm input...
  • Page 157 Tele Eye U s er P a g e 152 G u i d e VI DEO FO RM A T Change camera video f ormat RECO RD M O DE Change recording mode DI SK M O DE Change recording disk mode Q UA LI TY Change recording q uality I M A G E SI Z E...

  • Page 158: O P E Ra Tion L Og O P E Ra Tion C Ol Um N T A B L

    Tele Eye U s er P a g e 153 G u i d e [EVENT] SW I TCH Enable / disable sw itch action [EVENT] SW Change associate sw itch in sw itch action LA TCH DUR Change sw itch latch duration SW I TCH DELA Y Change sw itch action delay [EVENT] DI A LBA CK...

  • Page 159: H A Rd D Is K R E Com M E Nda Tion L Is

    Tele Eye U s er P a g e 154 G u i d e APPENDIX G H ard D is k R ec o mmen dat io n L is t H a r ddis k P r odu ct L in e M odel No.

  • Page 160: S P E Cif Ica Tions

    Tele Eye U s er P a g e 155 G u i d e APPENDIX H Spec if ic at io n s M O D E L V I D E O I NP U T RX 3 64 RX 3 68 RX 3 616 (P): PA L/ CCI R, 625 lines, 25 f rames per second...
  • Page 161 Tele Eye U s er P a g e 156 G u i d e RE C O RD I NG manual, schedule, event-driven M O D E I DE interf ace, removable H D T Y P E (P) : 25f ps at 720 X 576 pixels;...

This manual is also suitable for:

Rx368Rx3616

Table of Contents