Winmate Slim-line User Manual page 7

WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l'équipement ne se
décharge pas sur vous.
 Cover workstations with approved anti-static material. Use a wrist strap connected to a
work surface and properly grounded tools and equipment.
 Use anti-static mats, heel straps, or air ionizer for added protection.
 Handle electrostatic-sensitive components, PCB's and assemblies by the case or the edge of
the board.
 Avoid contact with pins, leads, or circuitry.
 Turn off power and input signals before inserting and removing connectors or test
equipment.
 Keep the work area free of non-conductive materials, such as ordinary plastic assembly aids
and Styrofoam.
 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that are
conductive.
 Always put drivers and PCB's component side on anti-static foam.
vi