Winmate Slim-line User Manual page 6

CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
 Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.
 Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
 If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
 Never pour any liquid into an opening. This could cause fire or electrical shock.
 Never open the equipment. For safety reasons, only qualified service personnel should
open the equipment.
 All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the following problems
appear:
o The power cord or plug is damaged.
o Liquid has penetrated into the equipment.
o The equipment does not work well or you cannot get it to work according to
the user manual.
o The equipment has been dropped and damaged.
o The equipment has obvious signs of breakage.
 Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the equipment.
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l'appareil de fixation recommandé pour éliminer le risque
de blessure.
WARNING!/ AVERTISSEMENT!
Only use the connection cords that come with the product. When
in doubt, please contact the manufacturer.
Utiliser seulement les cordons d'alimentation fournis avec le
produit. Si vous doutez de leur provenance, contactez le
manufacturier.
v