Signet 9900 Operating Instructions Manual page 24

Operation
ENTER
Edit
or
Input Edit
Input Edit Choices
24 9900 Transmitter
3s
or
(Password may
ENTER
be required)
+
2x
Or
Return to
View Mode
Keypad Functions
The four buttons of the keypad are used to navigate display modes
according to the descriptions in this table. Notice that the function
of each button may change depending on the display mode.
System Setup: Menu Navigation
This basic operating procedure repeats throughout the 9900 program:
1. Press ENTER for 3 seconds to enter MENU mode.
2. Press ► to move to the desired menu then press ENTER to
select it. (Password may be required.)
3. Press ▲ or ▼ to select the desired menu item for editing.
4. Press ► to edit the value/selection.
5. Press ENTER to store the new value/selection.
6. Press ▲ or ▼ to select another menu item if desired.
Repeat steps 3-5 as required.
7. Press ▲+▼ to select a different menu to edit.
Repeat steps 2-5 as required.
8. When fi nished editing all menus, press ▲+▼ again to return to
normal operation.
The menu is constructed in a loop, so you can move forward and
backward to select an item. After any item is saved (by pressing
ENTER), the display will return to the previous menu.
ENTER
or
Saves Changes
+
Select another
Menu Item