Selecting Paper From The Bypass Tray; When Using The Default Paper Size; When Using The Special Paper Size - Ricoh AFICIO MP01 Operating Instructions Manual

COPYING
SELECTING FROM THE BYPASS TRAY

When using the default paper size

1
Press the [Paper] button until "B:<paper
size>" appears in the Message Display.
Choose any other settings and make your
copies.
2
Press the [Start] button.
The size of paper in the Bypass tray can be specified as a default value.
Refer to "CHANGING THE DEFAULT SETTINGS" chapter.

When using the special paper size

1
Press the [Paper] button until "B:<paper
size>" appears in the Message Display.
2
Press the numeric keypad's [#] key.
3
Use the numeric keypad to input the
vertical dimension (length across feeding
direction) of the paper in the Bypass Tray.
Use [*/.] to input a decimal point.
The vertical dimension of the paper can be specified to any value in the
following range.
Inch Version
Metric Version
4-8
3.5" to 12" (in 0.01inch increments)
90mm to 297mm (in 1mm increments)
100% Ready
1:8½×11
100% Ready
B:8½×13
100% Ready
B:8½×13
Odd Size (3.5~12 #)
Vert.:______inch
1
Auto
1
Auto
1
Auto