Table of Contents
Advertisement
ERROR MESSAGES
Scanner not connect Check Scanner
No response from Scanner. Quit the Copy Application, restart the Windows 95
and then restart the Copy Application.
If this message appears again, turn off the Scanner and the Computer, and then
check the connection between them.
Printer not connect Check Printer
No response from Printer. Quit the Copy Application, restart the Windows 95
and then restart the Copy Application.
If this message appears again, turn off the Printer and the Computer, and then
check the connection between them.
Max copy entry Press start to copy
A maximum of 100 pages of original can be set on the ADF.
Although the copying is temporarily stopped, if the [Start] button is pressed, the
copying is continued.
Note: If the Staple mode has been set, the staples are automatically released.
If the Collate mode has been set, the copy block up to page 100 and the
copy block from page 101 and collated separately.
TWAIN Used by Other Application
Press the [Clear Modes] button to clear the error, then close the other application
that is using the Scanner.
7-4
Advertisement
Table of Contents
