Table of Contents
Advertisement
The default original type can be set to Photo or Text.
1
Press the [User Tools] button, then "1:
Copy setting" appears.
Press [#], then "Copy" appears.
2
Press [0], [7], then "07: Photo Original"
appears.
3
Press [#], then the current default setting
appears.
4
Enter [1] or [2] using the numeric keypad to set the default original type you
want.
No.
Selected item
1
Off (Text orig.)
2
On
Example : To specify "2: On".
Press [2].
Press [#].
The displayed default value is renewed
after about three seconds.
5
Press the [User Tools] button to complete
the operation.
CHANGING THE DEFAULT SETTINGS
ORIGINAL TYPE
Note
Text mode
Photo mode
User Tools
(1~2 #)
1:Copy Setting
Copy
(00~11 #)
07:Photo Original
Photo Orig.
(1~2 #)
1:Off (Text Orig.)
Photo Original
2:On
Photo Original
*On
Copy
(00~11 #)
07:Photo Original
100% Ready
1:8½×11
1
Auto
5-5
Advertisement
Table of Contents
