Table of Contents
Advertisement
You can specify whether or not Auto Tray Switch is enabled.
If it is enabled, the paper supply is automatically switched to another tray which
has the same size in the same direction when the paper in a tray runs out in the
middle of a copy job.
1
Press the [User Tools] button, then "1:
Copy Setting" appears.
Press [#], then "Copy" appears.
2
Press [1], [0], then "10: Auto Tray Switch"
appears.
3
Press [#], then the current default setting
appears.
4
Enter [1] or [2] using the numeric keypad to set the default you want.
No.
Selected item
1
Off
2
On
Example : To specify "2: On".
Press [2].
Press [#].
The displayed default value is renewed
after about three seconds.
5
Press the [User Tools] button to complete
the operation.
CHANGING THE DEFAULT SETTINGS
AUTO TRAY SWITCH
User Tools
1:Copy Setting
Copy
10:Auto Tray Switch
Tray Switch
1:Off
Tray Switch
2:On
Auto Tray Switch
*On
Copy
10:Auto Tray Switch
100% Ready
1:8½×11
(1~2 #)
(01~11 #)
(1~2 #)
(1~2 #)
(00~12 #)
1
Auto
5-15
Advertisement
Table of Contents
