COPYING
There are two methods that can be used to adjust the density of the copied
image, automatic and manual.
Automatic Image Density Control
With this method, the machine automatically adjusts the image density.
This function works well when contrast of the original is good.
1
Make sure that the "Auto" is shown for
the Image Density setting in the
Message Display.
If it isn't, press the [Image Density] button until "Auto" appears.
Refer to "Manual Image Density Control" in this chapter.
Choose any other settings and make your copies.
2
Press the [Start] button.
4-4
ADJUSTING IMAGE DENSITY
100% Ready
1:8½×11
1
Auto