Table of Contents
Advertisement
Use Staple when making copies stapled as
shown. Stapling is made one by one.
An optional Finisher and a Printer Hard Disk
are required for stapling.
1
Set the originals in the ADF.
Refer to "ORIGINALS" chapter.
The relationship between the position of
the staple and the set direction of the
original is as follows.
<Set in the document feeder>
Note : Duplex, Collate and Staple can be copied only from the ADF.
2
Press the [Collate/Staple/Duplex] button
until "Staple" indicator lights.
Note : When "Staple" is selected, "Collate" is
automatically selected at the same
time.
Choose any other settings and make your copies.
3
Press the [Start] button.
Note : The machine scans the originals and then starts stapling copies.
<Copy>
STAPLING
Document guide
Collate
Collate
Staple
Duplex
COPYING
Ratio
indicator Lit
indicator off
4-15
Advertisement
Table of Contents
