Viewing Chart Details In Chartview - Garmin G500 Pilot's Manual

5.2.2

Viewing Chart Details in ChartView

NOTE: The chart for the destination airport or loaded approach will
automatically be selected.
NOTE: Chart details are only available for instrument approach procedure
charts. Chart details are not available for airport diagrams or SID/STAR
charts.
1) While viewing the Charts page of the FPL page group, press the SELECT soft
key to activate chart selection.
2) Turn the large MFD knob to highlight the field to the right of the airport
identifier.
3) Turn the small MFD knob to highlight the desired chart.
Figure 5-12 Activate Chart Selection for the Current Airport (ChartView shown)
190-01102-02 Rev. E Garmin G500 Pilot's Guide
5-13