Garmin G500 Pilot's Manual page 201

Echo Top Data Viewing Range
The Echo Top Data Viewing Range option allows you to select the map range
where at and below that value Echo Top weather products will be shown on the
selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, Echo
Tops will not be shown. In the figure below where 200 NM is selected, Echo Top
data will be shown at map ranges of 200 NM and lower.
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options . The cursor flashes on the
"Weather Setup" option. Press ENT
2) Turn the large MFD knob to highlight the Echo Top Data Viewing Range
value.
3) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
190-01102-02 Rev. E
Figure 4-30 Echo Top Viewing Range Selection
Garmin G500 Pilot's Guide
.
4-43