Garmin G500 Pilot's Manual page 135

1) Turn the large MFD knob to reach the Aux page group. Turn the small MFD
knob to reach the Position Reporting page.
2) Press the small MFD knob to select the Report Type.
3) Turn the small MFD knob to highlight Standard and then press the ENT key.
4) The Position Reporting Period type will now be selected. Turn the small MFD
knob to highlight "Off" or "Automatic" and then press the ENT key. The
Position Reporting Period interval will now be selected.
5) Turn the small MFD knob to select the reporting frequency.
Figure 3-92 Select Standard Reporting Period Frequency
6) Press the small MFD knob to exit editing.
7) With the Standard Reporting Type, the reporting period may be manually
overridden by pressing the SEND soft key to send data.
SEND Soft Key Label
SEND Soft Key
Figure 3-93 Press SEND to Override the Reporting Period
190-01102-02 Rev. E
Figure 3-91 Select Standard Reporting
Garmin G500 Pilot's Guide
3-61