Garmin G500 Pilot's Manual page 242

1) Press the MODE soft key.
2) Press the GROUND soft key to place the radar in Ground Map mode. A pop-up
regarding caution in operating radar on the ground will appear. Turn the large
MFD knob to highlight "YES" and then press ENT.
3) Press the BACK soft key.
4) Press the MFD knob to activate the cursor.
5) Turn the large MFD knob to place the cursor in the TILT field.
6) Adjust the antenna tilt angle by turning the small MFD knob to display ground
returns at the desired distance.
7) Press the MFD knob to remove the cursor.
4-84
Figure 4-79 Ground Radar Operation Caution
Garmin G500 Pilot's Guide 190-01102-02 Rev. E