Garmin G500 Pilot's Manual page 321

Alert Message
AUD NOT AVAIL • Audio system not
AUD SYS FAIL
CAL LOST
CNFG
MISMATCH
CNFG MODULE
DATA LOST
DIAG MODE
ETM EXCEED
ETM FAULT
ETM FAULT
190-01102-02 Rev. E
Description
available.
• Audio system failure.
• Calibration Data Lost. • Contact your Garmin dealer for
• GDU 1-2 airframe
configuration settings
disagree.
• GDU configuration
module is inoperative.
• Pilot stored data was
lost. Recheck data
and settings.
• System is in Diagnostic
Mode.
• Engine Trend Monitor
exceedence/advisory.
• ADAS+ engine trend
monitor is reporting
an exceedence or
advisory condition.
• Engine Trend Monitor
needs service.
• ADAS+ engine trend
monitor is reporting a
system fault.
• Engine Trend Monitor
needs service. ADAS+
Enabled. Fault
received.
Garmin G500 Pilot's Guide
Action
• Contact your Garmin dealer for
service.
• Contact your Garmin dealer for
service.
service.
• Contact your Garmin dealer for
service.
• Contact your Garmin dealer for
service.
• Reset your settings.
• G500 pilot configurable items
have been returned to default
settings.
• Refer to ADAS+ documentation
for appropriate action.
• Refer to ADAS+ documentation
for appropriate action.
• Refer to ADAS+ documentation
for appropriate action.
6-3