Custom Paper - Epson SC-P5000 SERIES User Manual

SC-P5000 Series User's Guide
Item
Refresh Margin

Custom Paper

Set all items in the following table for commercially available paper based on the characteristics of the paper.
When customizing paper settings for genuine Epson paper, select the corresponding paper type from Select
Reference Paper, and then enter your settings.
* Default setting
Item
Select Reference Photo Paper,
Paper Proofing Paper, Fine
Art Paper, Matte
Paper, Plain Paper,
Others
Platen Gap
Standard
Wide
Wider
Thickness Pattern
Using the Control Panel Menu
*
On
Off
Description
You can select the media type that is the closest to the paper you are using.
* Select the Platen Gap, which is the distance between the print head and the
paper. Normally, select Standard. Select a wider setting if print results are
scratched or smudged.
Press the Z button to print a pattern to determine the thickness of the
current paper. Select the pattern number with the least misalignment from
the print results.
In the following example image, "4" is the best choice.
115
Description
This setting is effective for roll paper only.
After printing borderless on all edges, select whether to cut
automatically (On) or not to cut (Off) the leading edge of
the paper to remove any marks which may have been left in
preparation for the next job when printing with margins.