Introduction; Important Safety Instructions; The Symbols On The Product; Notes On Installing - Epson SC-P5000 SERIES User Manual

Hide thumbs Also See for SC-P5000 SERIES:
Table of Contents

Advertisement

SC-P5000 Series
User's Guide

Introduction

Important Safety Instructions

Read all of these instructions before using the printer. Also be sure to follow all warnings and instructions marked
on the printer.
For Users in Europe
Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.

The symbols on the product

The symbols on this Epson product are used in order to ensure safety and proper use of the product and to
prevent danger to customers and other persons, and property damage.
The symbols indicate the meaning below. Be sure that you completely understand the meaning of symbols on this
product before using it.
Stand-by
Alternating current

Notes on Installing

Do not obstruct the vents on the product.
If the vents are obstructed, the internal temperature could rise and cause a fire. Do not cover the printer with a cloth or install
it in a location with poor ventilation. Make sure you secure sufficient space for the installation as described in the manual.
U Setup Guide
Do not install or store the printer in an unstable location or a location subject to vibrations from other
equipment.
The printer could fall or tip over and cause an injury.
Do not install the printer in locations subject to oily smoke and dust, or in locations subject to humidity or
where it could easily get wet.
An electric shock or fire could occur.
Do not tilt the product more than 10 degrees forward, back, left, or right while moving it.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Introduction
Warning
Caution
6

Advertisement

Table of Contents
loading

Table of Contents