Creating Custom Paper Configurations; Selecting Custom Paper Configurations - Epson SureColor T5470M User Manual

For this paper
Enhanced Adhesive Synthetic Paper
Polyester banner (generic)
Backlight Film Roll
Parent topic:

Creating Custom Paper Configurations

You can create and store up to 10 custom paper configurations for use if printing on non-Epson paper or
paper that is not supported by the Epson printer driver.
1. Load the type of paper that you want to configure in the printer.
2. Press the
3. Select Settings > General Settings > Printer Settings > Custom Paper Setting.
4. Select a number for the custom paper configuration.
5. Select Change Name and enter a name.
6. Select OK when you are done.
7. Select Change Reference Paper.
8. Select a paper type that is similar to the paper that you want to use.
9. Select Advanced Media Setting.
10. Select any additional settings as necessary.
11. When you finish changing the custom paper configuration settings, press the
the menu.

Selecting Custom Paper Configurations

Parent topic:
Selecting Custom Paper Configurations
Once you have created a custom paper configuration, you can select the configuration whenever you
print on the associated media.
1. Press the
Selecting the Paper Settings for Each Source - Control Panel
home button, if necessary.
Media Handling
home button, if necessary.
Select this Paper Type or Media Type setting
Enhanced Adhesive Syn.
Enhanced Low Adh. Syn.
Heavyweight Polyester
Backlight Film Roll
64
home button to exit