Printing At Non-Standard Sizes - Epson SC-P5000 SERIES User Manual

SC-P5000 Series User's Guide
J
After joining all the sheets, trim off the borders
by cutting along the cut guides (outside the X
marks).
Printing Varieties
Printing at Non-Standard
Sizes
Before printing at non-standard sizes, including
vertical or horizontal banners and documents with
equal sides, save the desired paper size in the printer
driver. Once they have been saved in the printer
driver, custom sizes can be selected in the application
Page Setup and other print dialogs.
Supported paper sizes
The following table shows the paper sizes that can be
set in the printer driver. See the following for paper
sizes supported by the printer.
"Printable area" on page 52
U
Paper
Width
Paper
Height
*1 The smallest size supported by the printer is 203
mm wide by 254 mm long. If a smaller size is
entered in the printer driver as a Custom Paper
Size, the document will print with
wider-than-expected margins, which must be
trimmed.
*2 For Mac OS X Custom Paper Sizes, although
you can specify a large paper size which cannot
be loaded on this printer, it will not be printed
properly.
c
Important:
When using commercially available software, the
possible output sizes are restricted. If you are
using applications that support banner printing,
you can set a longer paper length. See the
application's manual for details.
90
89 to 432 mm
*1
Windows: 127 to 15000 mm
*1
Mac OS X: 127 to 15240 mm
*2