Epson SC-P5000 SERIES User Manual page 160

SC-P5000 Series User's Guide
The printer turned off due to a
power cut
Turn off the printer, and then turn it back on.
o
When the printer is not turned off normally, the
print head may not be capped correctly. If the print
head is left uncapped for a long time, the print
quality may decline.
When you turn on the printer, capping is performed
automatically after a few minutes.
Also, if the printer is turned off during calibration,
data transmission and writing adjustment values
may not be performed correctly. Turn on the printer,
and then check Calibration Date from the Printer
Status menu. When the date is initialized, the
adjustment values are also initialized.
Exit Epson Color Calibration Utility, and then restart.
The adjustment values are automatically restored.
"Printer Status" on page 118
U
U Epson Color Calibration Utility Operator's Guide
(PDF)
Forgot password set to protect the
network
Contact your dealer or Epson Support.
o
Problem Solver
160