Notes On Handling - Epson SC-P5000 SERIES User Manual

SC-P5000 Series User's Guide
Because the product is heavy, it should not be carried by one person.
Two people are needed to unpack or carry the printer. See the following for details on the product's weight.
U Setup Guide
Make sure you use the correct posture when lifting the product.
Lifting using the wrong posture could cause an injury.
When lifting the product, make sure you lift at the locations indicated in the manual.
If you lift holding other parts, the printer may fall, catching your fingers and causing an injury. See the following for details on
lifting the product.
U Setup Guide
When placing the product on a stand with casters (wheels), make sure you secure the casters before you
perform the work so that they do not move.
If the stand moves while you are performing the work, it could cause an injury.

Notes on Handling

Do not use the printer in locations with volatile substances such as alcohol or thinner, or near naked flames.
An electric shock or fire could occur.
Do not use the printer if it is giving off smoke or if you notice any abnormal odors or noises.
An electric shock or fire could occur. If any abnormalities occur, turn off the power and unplug the power cable immediately,
and then contact your dealer or Epson Support.
Never try to repair the printer yourself as this is extremely dangerous.
Do not use the printer in an environment where flammable gas or explosive gas may exist. Do not use
sprays that contain flammable gas inside or near the product.
A fire could occur.
Only route the cables as indicated in the manual.
A fire could occur. This could also cause damage to connected devices.
Do not insert or drop any metallic or flammable items into the openings on the printer.
An electric shock or fire could occur.
Do not touch any areas inside the printer except for those indicated in the manual.
An electric shock or burn could occur.
Do not disassemble anything except when indicated to do so in the manual.
If the LCD for the control panel is damaged, be careful of any leaking liquid crystal.
Provide first aid under any of the following conditions.
❏
If liquid adheres to your skin, immediately wipe it off and then wash the area using large volumes of soapy water.
❏
If any liquid gets in your eyes, flush them with clean water for at least 15 minutes, and consult a physician immediately.
❏
If liquid is swallowed, rinse your mouth out with water, swallow large quantities of water and vomit it back up, and
consult a physician immediately.
If any foreign objects or liquid such as water enters the printer, stop using it immediately.
An electric shock or fire could occur. Turn off the power and unplug the power cable immediately, and then contact your
dealer or Epson Support.
Introduction
Caution
Warning
7