Epson SC-P5000 SERIES User Manual page 136

SC-P5000 Series User's Guide
Caution:
Do not store the cutter within the reach of
children. The cutter's blade could cause an
injury. Pay careful attention when replacing
the cutter.
G
Install the new cutter.
Insert the cutter so that the pin on the printer
matches up with the hole on the cutter. Use a
cross-head screwdriver to tighten the screw to
hold the cutter in place.
c
Important:
Tighten the cutter firmly, otherwise the cut
position may be slightly shifted or skewed.
Maintenance
H
Close the cover.
Push in the cover until you hear the upper
portion click into place.
I
Return the front cover.
Re-insert the four screws that hold the cover in
place and use a cross-head screwdriver to
tighten them. The shape of the screws differ for
the top and the front. Use the screws that come
with a washer for the front section (the
cartridge cover section).
If you are using the optional SpectroProofer,
install the SpectroProofer into place without
returning the front cover.
c
Important:
If the front cover is not properly in place, an
error occurs and the printer does not respond.
136