SC-P5000 Series
User's Guide
Rear/Spindle
A
Rear unit
Remove if the paper jams, and then clear the jammed paper. Normally installed when using the printer.
B
Roll paper holder unit connector
Always use with the cable connected.
C
USB port
Connects the USB cable.
D
Airflow vents
Vents the air used to cool the inside of the printer.
E
LAN port
Connects the LAN cable.
F
Status light (green and red)
The color indicates the network transmission speed.
Off
: 10BASE-T
Red
: 100BASE-TX
Green
: 1000BASE-T
G
Data light (orange)
The network connection status and data reception are indicated by a lit or flashing light.
On
: Connected.
Flashing
: Receiving data.
Introduction
14