Operating Method; Before Using The System; System Operation - Inter-m PAC-5000A Operation Manual

Operating Method

Operating Method

1. Before using the system

1) Set all the volumes to minimum level before connecting to a wall outlet.
2) Please make sure that the speaker and the input terminals are connected properly.
In particular, make sure that the AMP input / output jacks on the rear panel are connected properly.
3) Confirm the settings of MASTER, SLAVE modes.
4) The red LED on power button on the front panel will blink and stop when the main power switch on back is
turned on.
5) Pressing the power button on front panel will turn on the display window.
6) Adjust both the input and main volume to operate the system.

2. System Operation

1) Dual Broadcasting
System can broadcast to two different areas (Group A and Group B) with unique broadcasts to each Group.
- Input selection by group
Each time the button is pressed, input changes in the order of TUNER → MEDIA → AUX1 → AUX2.
Select an input by using the input selection button (FUN) for each group.
Example) Group A: TUNER Broadcast, Group B: MEDIA (CD) Broadcast.
- Main Volume Control by Group
Use the mode selection button on the front panel to adjust the speaker output level by Group.
☞
- MIC and Chime Broadcast
• MIC broadcasting can be separate for Group A and Group B.
• Press the MIC/LINE button for a specific group to broadcast to.
☞
※Note: For Chime operation, Group must be selected using the MIC/LINE button.
• Before pressing the Chime button, adjust the input volume level properly.
☜
➡
DIGITAL PA COMBINATION SYSTEM
PAC-5000A/5600
17