Page 1
Operation anual Digital P System PSI-5120 /5240...
Page 2
Welcome personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
9) EQ Control function .........................16 dditional Function ........................17 1. FM MUTE ..........................17 2. Memory Initialization.........................17 pplications ..........................18 Specifications ..........................19 Method to ssemble Rack Bracket ....................21 Service Procedures ..........................22 Schematic ..........................22 Parts List .............................22 Variations and Options .......................22 Warranty ............................22 PSI-5120A/5240A...
- IR REMOTE CONTROL SENSOR (REMOTE CONTROL SEP R TELY SOLD) Remote control is available using the remote control. - R CK MOUNT BLE (R CK BR CKET SEP R TELY SOLD) Separate rack bracket (BKT-PSI5120) can be assembled for rack mounting. (See page 23) PSI-5120A/5240A...
If transmitting digital data as they are, data errors are little since it is not less affected by electrical noise than electrical signal. Digital interface used in this product is a form of S/PDIF(Sony/Philips Digital Interface), complying with standards called as IEC958. PSI-5120A/5240A...
This is a button to select input signal and you can select one of FM TUNER, CD, USB, DRP, AUX 1, AUX 2, or DIGITAL INPUT. AUX 1/2 is changed whenever pressing the AUX button. 6. DISPL Y MODE SELECT BUTTON Button to check the remaining time of current selection. PSI-5120A/5240A...
Page 8
CD Eject Button. If pressing the HOLD button once again, “HOLD OFF” is displayed on the display and the relevant function is released. 17. RECORD & ER SE FUNCTION BUTTON This button is used to delete a file stored in the DRP. PSI-5120A/5240A...
Page 9
- To exit the mode, press the ■ (Stop) button. 10) GROUP ▲/▼ (UP/DOWN) Button This button is used to select the folder which have MP3 or WMA files. 11) RANDOM Button This button is used when playback music in a disc randomly. PSI-5120A/5240A...
Page 10
This is the insert slot of a Disc. If you put a Disc in the slot, then the disk is automatically entered into the slot. 20. CD DISC EJECT BUTTON This button is used to take out a disc. PSI-5120A/5240A...
This terminal is used to input/output digital audio signal and you can transmit digital signal without loss of sound. 6. MX / CRESTRON INTERF CE (RS-232) This is a control port to use a remote device such as AMX or CRESTRON control system. (For your reference, the maximum cable length is about 15m) PSI-5120A/5240A...
Page 12
All functions except for some are available and you can check their detailed contents if downloading data for control protocol. •Downloading of control protocol Please download the protocol at the inter-m site, www.inter-m.com, SUPPORT / DOWNLOAD folder. 7. CHIME VOLUME This is a volume to control Chime Level.
Make certain that the total impedance is not less than the rated impedance indicated. HIGH IMPEDANCE SPEAKER INSTALLATION ※ Total power sum of all zones (1~10) must not exceed the rated power. PSI-5120A:120W, PSI-5240A:240W ※ Do not use 4 speaker terminal and high impedance speaker terminals at the same time.
Frequent noise may generate even by using dedicated FM antenna at downtown or streets with a great of traffics, factory premise or high voltage transmission lines. In such areas, install outdoor antenna with 75 cables for connection of FM antenna. PSI-5120A/5240A...
• If pressing the ▶ (PLAY) button once again, the selected function is released and continuous play is done from the current portion. 2) DISC CHECK You can check with the relevant icon of the right lower part of the display. - CD : “1CD” icon lights on. PSI-5120A/5240A...
- Ability to copy the CD/USB contents to the DRP during playback to save time. - Using this feature will greatly extend the life of the CD mechanism by copying the content of a CD into the internal memory and playing from DRP source. PSI-5120A/5240A...
- ◀◀ ▶▶ Select the MEMORY FORMAT or DISK to delete and press the ENTER button. - MEMORY FORMAT will delete all contents of internal memory (DRP). - DISK DELETE, ◀◀ ▶▶ Select the entire DISK or a track to delete and press ENTER button. PSI-5120A/5240A...
- Control the function to the desired level by using the +, - button. - If pressing the EQUALIZER MODE button lengthily, the final control status is saved in the relevant mode (USER1~5). - If not in use, place it at the EQ OFF position. PSI-5120A/5240A...
3) Select “Initial ON” by using the ◀◀ / ▶▶ (SEARCH DOWN/UP) button. (Default setting is OFF) 4) Press the ENTER button to initialize. After this function is completed, “Complete” and “POWER OFF” are alternatively displayed. 5) Turn the power off and then power on to complete the initialization. PSI-5120A/5240A...
0°C ~ +40°C Power Source 100-120VAC or 220-240VAC ; 50Hz/60Hz, 24VDC Power Consumption 85 W (1/8W POWER) Weight(SET) 13kg/28.7lb Dimension(SET) 430(W)×204(H)×310(D)mm/17(W)×8(H)×12.2(D)in * Design and specification are subject to be changed for the improvement of product quality without pre notice. PSI-5120A/5240A...
Page 22
DIGITAL PA SYSTEM Dimensions PSI-5120A/5240A...
1. Put RACK BRACKET (BKR-PSI5120) from the front side of the system. (BRACKET separately sold) 2. Secure the side of system firstly using S1 (4EA). 3. Secure the system to the rack by using S2 nuts (4EA), W1 (4EA) and washers (4EA). PSI-5120A/5240A...
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.
Page 28
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).