Priority Setup - Inter-m PMU-240NA Operation Manual

3) Then change the pC playback system to USB Audio DAC.
4) Touch pC AUDIO on lCD screen.
5) If worked normally, you will see that it is connected on the STATUS page. If not connected normally, it will
play out disconnection.
6) If connected normally, the sound source played in pC will output through the speaker connected to pMU-nA.
● PRIORITY setup
1) Operation > note STArT and set up pMU-nA.
2) According to the examples below, set up the priorities of input sources.
example) If setting up according to such priority: Tel In, CH1, CH2 > USB, CHIMe, exT In > CH3~CH6,
neTWOrK, AUx, pC AUDIO
MIxIng AMplIfIer
pMU-240nA/600nA 35