I Radio Operation - Inter-m PMU-240NA Operation Manual

2) Start the audio server and contact closer of AOe-212n that you are going to use, and connect the source
device to audio input connector of AOe-212n.
⇒ for more information about setup, note AOe-212n manual.
3) Touch reMOTe COnTACT on AOe STreAM setup page to revitalize contact closer control function.
4) Then log in to pMU-nA webpage to add the using server address of AOe-212n.
⇒ for more information about setup, note the provided webpage manual.
5) Select the using AOe-212n from the server list.
6) On the control switch connected to AOe-212n.
7) When the contact closer is revitalized, AOe STreAM (output the audio signal of the source device connected
to AOe-212n through the speaker connected to pMU-nA) will be broadcasted and the MASTer volume is
set up to 100. While contact closer is revitalized, MASTer volume cannot be controlled.
8) When Off the Control switch and contact closer becomes inactive, AOe STreAM stops.
9) The same way as number 1), through AOe-212n contact closers' input channel 1-5, you can individually
On/Off the pMU-nA ZOne 1~5.
※ for the selected function, AOe should be selected as first priority in the setup.
※ When AOe STreAM connection is cleared, speaker channel goes back to the prior condition.
● I RADIO operation
1) Connect pMU-nA to the network connected to external private network.
2) from the user pC that is connected to the same network, log in to pMU-nA webpage and add the selected
radio broadcasting Url.
⇒ for more information about setup, note the webpage manual registered on the website.
3) Touch lCD screen > >
MIxIng AMplIfIer
pMU-240nA/600nA 33