Start - Inter-m PMU-240NA Operation Manual

MIxIng AMplIfIer
● START
1) Connect various source that the user wants, to the device.
2) Connect speaker to the speaker output connector on the backside.
⇒ note Operation > speaker connection description.
3) When connecting AC code to the device, InTerM logo will be displayed ton lCD and the device starts booting.
4) When booting is finished, power signal leD turns orange and the device turn to STAnD BY state.
5) now press the power switch, the device starts activating and power signal leD turns green.
6) On lCD start up screen as below will show, user can touch to select the wanted menu.
7) After the device is turned on, open the front cover and the lCD volume control screen will show
automatically.
⇒ When doing no volume control for some time, it goes back to the prior screen.
8) Select the broadcasting speaker channel. (press All switch to On/Off all speaker output.)
9) While checking speaker output, control various input control volume and master volume properly.
10) Broadcasting priority, chime, contact close action, etc. Whatever function user is looking for, use it through
lDC or webpage.
30 pMU-240nA/600nA