Web Setting; Ⅱ. Network Setup; Ccessing Pmu-N Series Web-Page - Inter-m PMU-360N Operation Manual

Web Setting

Web Setting
※ Contents of this Operation Manual are subjected to be changed by revision of firmware. please refer to
"www.inter-m.com/en" for latest one.
Ⅰ. ccessing PMU-N Series Web-page
- If IP address has not been set, type the
default IP address (192.168.1.99)
– by pushing the factory set switch more
than 5 second, the unit will be reset as
default mode.
When connected normally, user
verification window will pop-up.
Type the created ID and P SSWORD to log in. (Default ID: admin, Password: 1)
※ Changing password: please refer to the section of '11. password setting'
※ Caution : It is better to set and use the assigned password for the security purpose.
Please make a note to keep the assigned password.
Ⅱ. Network Setup
This is network setting page. The host name is used for each of identification when multiple unit is in auto
searching mode.
※IP address : Network information automatically set by DHCP (Dynamic Host Configuration Protocol) or
can be set as Static IP address.
MIXING MPLIFIER
PMU-360N/480N/600N
13