Table of Contents
Advertisement
22. Carefully pry loose the aux. input panel with a pick tool or small fl at screwdriver, disconnect wiring and
remove the screw retaining the radio bezel. Fig. 13
23. Pull loose the radio bezel and disconnect wiring. Fig. 14
24. Remove the four screws securing the radio, remove radio and disconnect wiring.
Radio Removal (Trucks with Column Mounted Shifter)
25. Pull loose the rubber tray above the radio and remove the two screws beneath it. Fig. 15
26. Remove the two screws in the top of the instrument cluster bezel. Fig. 16
27. Pull the bezel loose, but do not completely remove. The bezel just needs to be loose enough to allow
the left vent assembly to be removed.
28. Pull loose the left vent assembly and remove. Fig. 17
29. Open the glove compartment and squeeze the sides to allow it to fold all the way down.
30. Find the three bolts securing the passenger side airbag assembly and remove it. Fig. 18
Fig. 13
Fig. 15
Fig. 17
Fig. 14
Fig. 16
Fig. 18
5
Advertisement
Table of Contents
