Manual Tuning; Storing Stations; Recalling A Stored Station - Logik L66DAB11 Instruction Manual

Manual Tuning

As well as the auto tune function, you can manually tune the receiver. This can help you when
aligning your aerial or when adding stations that were missed while auto tuning.
1. Press the MENU button to enter the Tune Select Menu and then
press the SELECT button to confirm. The display will now show
Manual tune.
2. Press the
are numbered from 5A to 13F.
When your desired channel number is selected, press the SELECT
3.
button to enter the current multiplex. The top line will now display
the multiplex name and the second line will display the signal
strength.
Press the SELECT button to confirm the selection, or press the
4.
buttons to look for another station that you would like to listen to.

Storing Stations

You can store up to 4 of your favourite DAB stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. Press the
hold the PRESETS 1-4 buttons of your choice to confirm. The station will be stored and the
screen will then show "Preset # saved".

Recalling a Stored Station

Once you have saved a station, you can recall it by pressing the PRESETS 1-4 buttons.
• There are 4 default preset stations, you can overwrite these as you like.
• If you press and hold the Preset 1-4 buttons for too long while recalling a saved
station you will save the current station and overwrite the previous one.
14
buttons to cycle through the DAB channels, which
buttons to select your desired preset station number and then press and