Auto Scan Modes; Secondary Services; Manual Tuning - Logik L3DAB12 Instruction Manual

Auto Scan Modes

There are two types of scans, one is Quick scan and the other is Full scan.
Quick scan:
•
Searches the stations between channels 10A and 12D.
To activate the quick scan press the SCAN button.
• Full scan:
Searches all DAB channels in the DAB Band III.
Press and hold the SCAN button for 2 seconds.

Secondary Services

You may see a ">" symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add
extra commentaries. The secondary services are inserted directly after the primary
station in the station list.
To select the secondary station, press the NEXT button when the ">" appears in
the display before the station name. When the secondary service ends, the unit will
automatically switch back to the primary station.

Manual Tuning

As well as the auto tune function, you can manually tune the receiver. This can help
you when aligning your aerial or when adding stations that were missed while auto
tuning.
1. Press and hold the SELECT button, the display will now show Manual tune.
2. Press the PREV / NEXT buttons to cycle through the DAB channels, which are
numbered from 5A to 13F.
3. After your desired channel number is selected, press the SELECT button to
enter the current multiplex, the top line will now display the first station in the
multiplex.
4. Press the PREV / NEXT buttons to see what stations are present in the found
multiplex.
5. Once you have reached the last station in the found multiplex, it will revert back
to the first station. If you wish to exit the Manual Tuning mode, just press the
SELECT button.
GB-11