Service Document List - Lycoming IO-360-N1A Installation And Operation Manual

IO-360-N1A Engine Installation and Operation Manual
NOTICE: The following is a list of service documents referenced in or incorporated into the
information in this manual. Always refer to the latest revision of any service document
for changes or additional information.
Number
S.B. 369
S.B. 480
S.B. 533
S.I. 1009
S.I. 1014
S.I. 1070
S.I. 1098
S.I. 1132
S.I. 1154
S.I. 1241
S.I. 1409
S.I. 1427
S.I. 1443
S.I. 1472
S.I. 1481
S.I. 1505
S.I. 1528
S.I. 1530
L 114
L180
© 2016 Avco Corporation. All Rights Reserved
February 2016

SERVICE DOCUMENT LIST

Incorporation
Date
02/16 Engine Inspection after Overspeed
02/16 I. Oil and Filter Change and Screen Cleaning
II. Oil Filter Screen Content Inspection
02/16 Recommended Action for Sudden Engine Stoppage,
Propeller/Rotor Strike or Loss of Propeller/Rotor
Blade or Tip
02/16 Recommended Time Between Overhaul Periods
02/16 Lubricating Oil Recommendations
02/16 Specified Fuels
Propeller Flange Bushing Location
02/16
02/16 Magneto Drop-off
02/16 FAA Approved Starter and Alternators
02/16 Pre-oil the Engine Prior to Initial Start
Lycoming Engines P/N LW-16702, Oil Additive
02/16
02/16 Lycoming Reciprocating Engine Run-In and Oil
Consumption
02/16 Approved Slick Magnetos on Lycoming Engines
02/16 Removal of Preservative Oil from Engine
02/16 Factory Engine Preservation
02/16 Cold Weather Starting
02/16 Aircraft Engine Starter Recommendations
02/16 Engine Inspection in a Particulate Laden
Environment (Volcanic Ash, Sand, Dust, Airborne
Debris)
Reciprocating Engine and Accessory Maintenance
02/16
Publications
02/16 Engine Preservation for Active and Stored Aircraft
Subject
Service Document List
Page iii