Installation 1. Connect the handset to DPH-70E with handset cord. 2. Plug one end of telephone cable (RJ-11) into the LINE port on the rear panel of DPH-70E and the other end into a working telephone wall jack. 3. Plug the AC power adaptor provided into an AC outlet and insert the power cord into the connector marked “AC”...
Internet Access Telephone Number User Name Password To enter these parameters, follow the steps below. DPH-70E voice menu guides you through the configuration process. 1. Enter Menu Key to enter the configuration menu. 2. Enter the configuration password. The default password is ‘12345’.
VoIP server address. The default password is ‘56789’. If password is not known, press ENTER to come to main menu. 7. Enter ‘5’ to save the calling card information. After these basic configurations, DPH-70E is ready to make and receive Internet phone calls as described in the next section. Country Code...
Page 5
MAIN MENU 1. ISP SETUP ISP Phone Number ISP User Name ISP Password 2. VOIP SETUP VoIP User Name VoIP Password VoIP Server IP 3. PHONE SETTINGS Configuration Password Country code Volume Control Dial Prefix Ring Tone Review Configuration 6 Î 6.
Need help?
Do you have a question about the DPH-70E and is the answer not in the manual?
Questions and answers