Milwaukee WCE 65 Original Instructions Manual page 4

Sharpen blunt diamond cutting blades (can be recognised
by sparks flying while cutting) by making several cuts into
calcareous sandstone or a special sharpening stone.
The Milwaukee diamond cut-off wheels supplied are of an
extremely high quality and enable high cutting
performances to be achieved in all types of rock and
concrete. In the event of wear we recommend that you
replace them with diamond cut-off wheels from Milwaukee's
range of accessories.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all
times.
Use only Milwaukee accessories and Milwaukee spare
parts. Should components need to be replaced which have
not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the
six-digit No. on the label and order the drawing at your local
service agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.
6 ENGLISH
SYMBOLS
Please read the instructions carefully before
starting the machine.
Always wear goggles when using the
machine.
Wear ear protectors!
Use an FFP2 particulate respirator as the
minimum amount of protection.
Wear gloves!
Always disconnect the plug from the socket
before carrying out any work on the
machine.
Accessory - Not included in standard
equipment, available as an accessory.
Do not dispose of electric tools together
with household waste material! In
observance of European Directive 2002/96/
EC on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling
facility.
Class II construction, tool in which
protection against electric shock does not
rely on basic insulation only, but in which
additional safety precautions, such as
double insulation or reinforced insulation,
are provided.
Brief
description
Swivel lock
Spindle lock
Direction of rotation arrow
Infinitely variable cutting width adjustment
17-60 mm. Cutting width adjustment 8-16 mm with
set of distance plates (special accessory).
Infinitely variable cutting depth adjustment with
movable supporting table.
Switch lock and stop lever
On/Off switch
No-load speed limit for low-noise operation
Additional side handle
Parallel guide
Depth gauge
Rolls
Suction cover
Protective cap
Modifications: Text, diagrams and data are correct at the time of printing. In the interest of continuous
improvement of our products, technical specifications are subject to alteration without prior notice.
ENGLISH 5
Suction adapter
Working tool
WCE 65
ENGLISH 7