Keithley 2600a series Reference Manual page 393

Series 2600A System SourceMeter® Instruments Reference Manual
lan.config.dns.hostname
Attribute Stores the DNS host name.
Default ""
TSP-Link
This attribute can be accessed from a remote TSP-Link node.
accessibility
Usage
hostname = lan.config.dns.hostname
lan.confg.dns.hostname = hostname
hostname
Remarks • Stores the host name requested during DNS registration.
• DNS registration works with the DHCP to register the host name specified in this attribute with
the DNS server.
• The host name must:
• Contain 255 characters or less.
• Begin with a letter and end with a letter or a number.
• Only contain letters, numbers, and hyphens.
• The host name must be a string that contains less than 255 characters.
• The host name plus the domain name must be less than or equal to 255 characters.
Note: This include the separator characters.
lan.config.dns.verify
Attribute The DNS host name verification state.
Default
lan.ENABLE
TSP-Link
This attribute can be accessed from a remote TSP-Link node.
accessibility
Usage
state = lan.config.dns.verify
lan.config.dns.verify = state
state
Use one of the following values for state:
lan.ENABLE
lan.DISABLE
Remarks • Used to enable or disable the DNS host name verification.
• When enabled, the instrument performs a DNS lookup to verify the DNS host name matches the
value specified in the command lan.config.dns.hostname.
2600AS-901-01 Rev. B / September 2008
-- Reads DNS host name.
-- Writes DNS host name.
The host name to use for DNS registration.
The DNS host name verification state.
Enables the DNS host name verification.
Disables the DNS host name verification.
Return to Section Topics
-- Reads host name state.
-- Writes host name state.
Section 19: Remote Commands
19-71