Test 1 - Function: Version Indication; Test 2 - Function: Simplified Check Of All Memories - Yamaha TYROS4 Service Manual

Tyros4
Test 1
Function: Version indication
Description:
Displays version of program/data.
Use the TAB [ ]/[#] keys to switch between plural pages.
Displayed Message:
００１：Ｖｅｒｓｉｏｎ
Ｍｏｄｅｌ Ｎａｍｅ ：ＴＹＲＯＳ４（Ｅ） −ｒ
Ｍａｉｎ Ｐｒｏｇｒａｍ：１．００
ＳＳＰ１ Ｐｒｏｇｒａｍ：１．００
Ｂｉｔｍａｐ ：１．００
Ｃｏｎｔｅｎｔｓ１ ：１．００
Ｃｏｎｔｅｎｔｓ２ ：１．００
Ｗａｖｅ ：１．００
Ｍａｉｎ Ｂｏｏｔ ：１．００
Supplement:
Indicates model name (destination) and program/data versions.
If ErP is supported, the Model Name is "TYROS4 (E)-r".
If ErP is not supported, the Model Name is "TYROS4 (E)"
without the suffi x "-r".
"0.00" will be shown if the version is not recognized correctly.
68
Test 2
Function: Simplifi ed check of all memories
Description:
Executes the following fi ve tests in sequence.
• Test 3: ROM Check1
• Test 4: RAM Check1
• Test 5: Backup ROM Check1
• Test 6: Wave ROM Check1
• Test 7: Effect RAM Check1
It will take about 15 seconds for the check.
* The check cannot be aborted until OK/NG result is
Displayed Message:
Selected screen
Page 1 (Example)
Page 2
Supplement:
In case of NG, the location and the IC number of which NG is
detected will be shown.
"No Dev." will be shown if SSP1 PROG is not detected.
For each memory error indication, refer to the detail contents
of each test (Test 3 – 7) below.
(Tests 3 – 7 are performed automatically in sequence, but
the check stops when NG is detected.)
indicated.
００２：Ｍｅｍｏｒｙ Ｃｈｅｃｋ１ Ａｌｌ
００２：Ｍｅｍｏｒｙ Ｃｈｅｃｋ１ Ａｌｌ
ＯＫ
００２：Ｍｅｍｏｒｙ Ｃｈｅｃｋ１ Ａｌｌ
ＭＡＩＮ ＤＡＴＡ ＲＯＭ （ＩＣ１９ ） ＮＧ
Selected screen
In case of OK
In case of NG (Example)