MKH-D
Connector
Photo 8
29.
Hard Disk Drive Unit
Turn the Tyros4's power off, disconnect any cables including
AC power cord from the keyboard.
Also make sure to close the LCD panel and disconnect a
USB device from the [USB TO DEVICE] terminal.
Turn the Tyros4 face down on a blanket or some soft surface,
giving you direct access to the bottom of the instrument.
29-1
Remove the three (3) screws marked [S02C].
(Fig. 23)
Fig. 23
MK61L
MKH-D
Soldered
Photo 9
29-2
Pull out the HDD bracket and disconnect the USB cable
from the hard disk drive unit. (Fig. 24)
Fig. 24
29-3
Remove the three (3) screws marked [S08]. The hard
disk drive unit can then be removed from the HDD
bracket. (Fig. 25)
Fig. 25
Tyros4
EMKS-FD
23