Disassembly Procedure (Trs-Ms04); Ac Cord - Yamaha TYROS4 Service Manual

TRS-MS04

DISASSEMBLY PROCEDURE (TRS-MS04)

1.

AC Cord

(Time required: About 3 minutes)
1-1 Remove the eight (8) screws marked [A]. The rear panel
can then be removed. (Fig.1)
* When reinstalling the rear panel, confirm that the packing
is not damaged to avoid air leakage. (Fig.1)
1-2 Remove the soldering portions of the AC cord from the
AMP assembly. (Fig.1)
AC CORD Soldering part
24
AMP Assembly
Packing sheet
(Fig.1)
1-3 Remove the cord bushing from the rear panel. The AC
cord can then be removed. (Fig.1)
* When reinstalling the rear panel, confirm that the
packing is not damaged to avoid air leakage. (Fig.1)
Cord Bushing
[A]
AC CORD