Yamaha TYROS4 Service Manual page 109

[INSTALLER]
Displayed message
Now checking. Please wait a moment...
Now installing. Please wait a moment...
Now deleting. Please wait a moment...
E001 Install data read error!
E002 Install data checksum error!
E003 Install data address error!
E004 Flash ID error!
E005 Flash erase error!
E006 Flash write error!
E007 Flash verify error!
E008 Flash checksum error!
E009 Install data ID error!
E010 Can't downgrade!
E011 Install data does not exist.
E012 Can't delete the install data.
Updating has been completed.
Turn the power off.
The version of the installed program is
X.XX.
To start installation, please press the
[START/STOP] button.
To delete the update program, please
press the [BREAK] button.
The update program is ver.X.XX.
Are you sure you want to update?
YES: Press the [START/STOP] button.
NO: Press the [BREAK] button.
The update program is ver.X.XX.
Are you sure you want to delete?
YES: Press the [START/STOP] button.
NO: Press the [BREAK] button.
Meaning
Data is being loaded. Wait a
Data is being loaded
while.
During installing. Wait a
During installation of data
while.
Data is being deleted. Wait
During data deletion
a while.
Data loading error!
Data checksum error! When an error occurs (Installation data error)
Data address error!
Flash ROM ID error!
Flash ROM deletion error!
When an error occurs
Flash ROM writing error!
(Flash ROM writing disabled)
Flash ROM verify error!
Flash ROM checksum error!
The installation data is not intended for this
Data ID error!
model.
Data version error! Cannot return the program to the old version.
Upgrading data not found. Data not contained in the media
The version upgrading data
When an error occurs (Media writing disabled)
can not be deleted.
Installation completed.
Turn off the power and then
turn on again. When the installing completed
The version of the installed
program is "X.XX".
To start the installation,
press the [START/STOP]
button.
When the installer is started.
To delete the version
upgrading data, press the
[BREAK] button.
Version upgrading data is
"ver.X.XX".
Do you start installing?
When the completion of the installation is
YES: Press the [START/
detected
STOP] button.
NO: Press the [BREAK]
button.
Version upgrading data is
"ver.X.XX".
Do you delete the data?
YES: Press the [START/ When the deletion of the data is detected
STOP] button.
NO: Press the [BREAK]
button.
Progress/status
Tyros4
How to service
–
–
–
Store the media or installation fi le
again and perform reinstallation.
Change the Program Flash ROM
and confi rm WritePin.
Perform again with a proper
installation fi le.
Store the media or installation fi le
again and perform reinstallation.
Release the write protect of the
media.
–
–
–
–
109