Test 37 - Function: Midi Check - Yamaha TYROS4 Service Manual

０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
Ｐｅｄａｌ3 Ｕｐ
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
Ｐｅｄａｌ3 Ｏｕｔ
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
ＯＫ
In case of OK (Disconnection detection)
０３６：Ｐｅｄａｌ３ Ｃｈｅｃｋ
Ｎｏ Ｐｅｄａｌ
When unconnected (No foot pedal is connected)
Supplement:
Use an FC7 pedal for the checking.
Test 37
Function: MIDI check
Description:
Checks transmission/reception of signals with the [MIDI IN]
and [MIDI OUT] terminals connected with a MIDI cable in a
loop. (Start checking with the MIDI terminals connected with
a MIDI cable in a loop.)
Connect [MIDI A OUT] to [MIDI A IN] and [MIDI B OUT]
to [MIDI B IN] with MIDI cables. (The result will be NG if
connected alternately.)
Detection of Min
The test result of MIDI-A is OK and the sine wave C3 note
sound will be produced.
The test result of MIDI-B is OK and the sine wave C4 note
sound will be produced.
Displayed Message:
Detection of Max
０３７：ＭＩＤＩ Ｃｈｅｃｋ
０３７：ＭＩＤＩ Ｃｈｅｃｋ
ＭＩＤＩ−Ａ Ｃｈｅｃｋ −−
ＭＩＤＩ−Ｂ Ｃｈｅｃｋ −−
０３７：ＭＩＤＩ Ｃｈｅｃｋ
ＭＩＤＩ−Ａ Ｃｈｅｃｋ ＯＫ
ＭＩＤＩ−Ｂ Ｃｈｅｃｋ −−
When the MIDI-A is OK and MIDI-B is unchecked.
Tyros4
Selected screen
When the checking is started
87