Table of Contents
Advertisement
o Press the delay start button (8) repeatedly to select the required
delay time, as shown on the LED display.
o Press the start/pause button (2). The time delay LED should
light.
o After the set delay time has elapsed, the machine will begin
automatically.
Child lock
Your appliance has a child lock option, if this is set, it will mean that
nobody can affect the operation of the wash program once it has
started.
o When the machine is in use, press the delay start button (8) and
the spin speed selection button (7) simultaneously for about 3
seconds. The child locked icon will light to show the feature has
been activated.
o Follow the same procedure to release the child lock.
Power off memory
o If the power supply to the machine is cut off while it is in the
middle of a cycle, you do not need to do anything.
o The machine will continue the wash cycle when the power supply
returns.
IMPORTANT: DO NOT open the door by force when the power is
off. If you need to open the door as a matter of urgency, please
contact the Customer Care Advice Line.
Maintenance and cleaning
In daily use
o Once a wash cycle has completed, you should pull out the
detergent drawer slightly, so it can dry out.
o Leave the porthole door ajar for a short while after a wash cycle
has completed. This should help to prevent stagnant smells and
to protect the door seal.
o Close the water tap.
o We suggest that you disconnect the appliance from your mains
supply, when it is not in use.
19
Advertisement
Table of Contents
