WIKA DG-10-E Operating Instructions Manual page 6

7. Starting, operation
Model DG-10-E
Software version
Display
Measuring range
Password entry
PASS
Password status
P.STATUS
Password change
P.CHANGE
10 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
GB
Unit
UNIT
Tare function
TARA
Background
illumination
LIGHT
Automatic
Switch off time
-Key changes figure of display
A.OFF
on entry.
-Key sets display value
0 ... 9 on entry.
Factory setting "0000".
Factory settings
Password is only active in "ON"
FACTORY
position.
"PASS" does not appear in menu
in "OFF" position.
Factory setting "OFF".
Storage of
The password is generated/
settings
changed using this function
STORE
-Key changes figure of display
on entry.
-Key stes display value
0 ... 9 on entry.
Factory setting "0000".
DG-10
7. Starting, operation
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio DG-10
GB
Unit may be selected
Factory setting "BAR"
1. Version without initial pressure:
enter tare value using keys.
2. Version with initial pressure:
press both keys together.
Entry is coninuous without
changing character see Chapter
Programming / Tara function.
Factory setting "0000".
Background illumination may be
selected.
In "ON" position illumination
remains switched on for 15 secs
after every key operation.
Factory setting "OFF".
Automatic switch off time of
device may be selected in
minutes.
Factory setting "OFF".
Resets all parameters to factory
setting.
Factory setting "NO".
Stores all parameter settings.
Factory setting "NO".
11