WIKA DG-10-E Operating Instructions Manual page 4

7. Starting, operation
Mechanical connection
 For Model DG-10 you have to provide for a sealing element; exceptions are instru-
ments with self-sealing threads (e.g. NPT thread).
Please refer to our data sheet "Pressure gauge sealing washers AC 09.08" in WIKA's

product catalog Pressure and Temperature Measurement or our website
www.wika.de for details about sealing washers.
When mounting the instrument, ensure that the sealing faces of the instrument and

the measuring point are clean and undamaged.
Screw in or unscrew the instrument only via the flats using a suitable tool. The

appropriate torque depends on the dimension of the pressure connection and on
the sealing element used (form/material). Do not use the case as working surface for
screwing in or unscrewing the instrument.
 When screwing the digital gauge in, ensure that the threads are not jammed.
 For tapped holes and welding sockets please see Technical Information IN 00.14 for
download at www.wika.de -Service
Power supply
 Operate the digital gauge with 2 Mignon batteries AA.
 If the charge state of the batteries is low, a flashing battery symbol will appear on the
display. In this case, replace the batteries.
 Open the battery compartment cover on the back of the digital gauge.
 Replace the batteries with 2 new Mignon cells. Close the cover of the battery
compartment.
6 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio
Product label (example)
Pressure range
Power supply
S # Serial No. with coded manufacture date
P # Product No.
DG-10
GB
7. Starting, operation
Description of display screen
DG-10-S
Min. value
Main display
Battery status
DG-10-E
Min. value
Main display
Battery status
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio DG-10
Max. value Bar graph display
Max. value Bar graph display
Special function Tare
GB
Full scale
Unit
2nd display
Full scale
Unit
7