Removing Paper Jam
Top left cover
Gently open the top left cover while lifting
up the release lever.
If the edge of the jammed paper can be reached at
the output tray, pull the jammed paper in the direc-
tion of the feed-out area.
1
2
If you cannot remove jammed paper inside the fuser
unit, lift up the lever and remove the jammed paper.
Tray 5 (Bypass)
Inspect the inside (paper feed entrance) of Tray 5
(Bypass), and remove any jammed paper.
2
Duplex Module Cover
1
2
Open the Tray 5 (Bypass) and gently open
the duplex module cover.
Remove the jammed paper.
Left center cover
Remove the jammed paper.
Bottom left cover
Remove the jammed paper.
See "4.5 Paper Jams" in "Part 1 Hardware"
of the User Guide (Copier).
Tray 1 to 4
Remove the jammed paper.
See the message on the
display to check the
relevant parts of the
machine.
3