Table of Contents
Advertisement
SERVICE MANUL
Model No.HLTD500ACW
Chapter 10 Maintenance
Lint filter needs to be cleaned before
or after each use for your unit to
operate at optimum efficiency. The
filter can be removed by pulling on
the tabs located on the inside of the
dryer door. The filter may be washed
or vacuumed. Remove the excess
water from the filter by gently shaking the filter. This will remove dust and
particles trapped in the filter. Lint built up in screen will restrict airflows, which
causes longer drying times. After cleaning, slide the filter back in place. Do not
use your dryer without the lint filter.
Do not use any type of spray cleaner when cleaning the interior.
clean the drum with damp cloth. Remove any residue before drying next load.
cleaners, as this could damage the dryer.
the duct and the vent on a regular basis to avoid clogging which could
affect the efficiency of the dryer.
Lint Filter
r. If dryer drum becomes stained,
r. Do not use harsh or abrasive
- 29 -
Issue
Rev.
Advertisement
Table of Contents
Troubleshooting
