Chapter 4 Operational Guidance - Haier HLTD500ACW Service Manual

SERVICE MANUL
Model No.HLTD500ACW

Chapter 4 Operational Guidance

Understanding the Control Panel


  

A B
CYCLE STATUS INDICATORS
A
When the dryer is first powered on, the Cycle Status lights indicate the stages of the selected
cycles.
As the dryer is operation,the active stage blinks.As a stage is completed, the light will turn off
and the next stage will begin to blink.
The entire dry cycle is complete when all of the status lights turn off.
The Clean Lint indicator will blink when the dryer is turned on as a reminder to clean the lint
screen.It will turn off when a dry cycle is started.
POWER BUTTON
B
Use this button to turn power to the dryer on and to turn the power off.
NOTE:If the dryer is powered on and is not started,it will automatically turn off after about 5
minutes.
DRY LEVEL BUTTON
C
Use this button to adjust the dryness level of automatic cycle programs.
NOTE:This button works with automatic cycles only.
D CYCLE SELECTION KNOB
There are 6 Automatic Cycles:
Sanitize - Use this cycle to help sanitize items such as towels,bedding,and children's clothes.
It is best to turn this cycle to completion.
Heavy Duty - Use this cycle for high-temperature heat and heavyweight fabrics such as towels
Normal - Use this cycle for medium-temperature heat and cottons and linens
    

 


 



   




C
and jeans.
    
 

 
  
 

 


   
E
D F
- 9 -
Issue
Rev.



  

  
  
   
  
  



G H I J K

