Channel Strip - PRESONUS FaderPort 8 Owner's Manual

3 ProTools (HUI)
3.2

Channel Strip

3.2 Channel Strip
1
2
3
4
5
6
7
8
Once you have connected your FaderPort 8 to your computer,
launch ProTools to set up the FaderPort 8 as a HUI device
1. Go to Setups | Peripherals
2. Create one HUI device under MIDI Controllers
3. Set the Receive From and Send To menus to "FaderPort 8" and "#Ch's" menu to 8.
4. Click "OK"
Your FaderPort 8 is now ready to use. Enjoy!
1. Channel Name and Level. Displays the Channel name and current fader level.
2. Metering. Displays the channel metering. This can be turned on or off by
pressing SHIFT plus the push button encoder in the Session Navigator.
3. Pan Position. Displays the Channel's current pan position.
4. Pan/Param. This push-button encoder controls pan for the currently
selected channel while in Track mode. For stereo channels, this will default
to the left pan control. Press the encoder to access the right pan control.
5. Select Button. This button selects the corresponding channel in ProTools.
While selected, several editing functions are available. See Section 3.2.2.
6. Solo. Isolates the corresponding channel's output signal in the mix.
7. Mute. Mutes the corresponding channel's output signal.
8. Touch-Sensitive Fader. This 100 mm motorized fader can be used to control
volume levels, aux send levels, panning, or plug-in parameters, depending on
mode. See Section 3.6 for more information.
FaderPort™ 8
Owner's Manual
14