Large Marker Mode; Automation Controls - PRESONUS FaderPort 8 Owner's Manual

4 Logic (MCU)
4.5

Automation Controls

Large Marker Mode

4.4.2
4.5 Automation Controls
As previously mentioned, pressing and holding the Marker button will engage Large
Marker mode in Logic. While in Large Marker Mode, the Select buttons will control
the following functions:
Marker1 Marker2 Marker3 Marker4
1 2 3 4
1. Select 1. Marker 1
2. Select 2. Marker 2
3. Select 3. Marker 3
4. Select 4. Marker 4
5. Select 5. Marker 5
6. Select 6. Create new marker at current playback position
7. Select 7. Create new marker at nearest bar
8. Select 8. Delete nearest marker
1 2 3
6 5 4
1. Latch / Save. Engages Latch Automation on currently selected track. Press
the SHIFT and Latch buttons simultaneously to save your session.
2. Trim / Redo. Engages Trim Automation on currently selected
track when Touch mode is engaged. Press the SHIFT and
Trim buttons simultaneously to redo the last action.
3. Undo. Press the SHIFT and Off buttons simultaneously to undo the last action.
4. Read. Engages Read Automation on currently selected track. Press
again to turn automation off on currently selected track.
5. Write. Engages Write Automation on currently selected track.
6. Touch. Engages Touch Automation on currently selected track.
Note: Off and User 1-3 functions are not available in Logic at the time this manual
was written.
Marker5 Cr w/o Create Delete
5 6 7 8
FaderPort™ 8
Owner's Manual
23